E760: Alarm "NO RX button command"
Updated: 06/16/2017
Article #: 92
This message is displayed when the Generator CPU board (A9) is not
detecting the RX button during the emission start-up.
In this case, check the correct insertions of X53-X53 (flat cable) between
Generator board and Generator CPU board (A9).
Check the CANBus connection between the Generator CPU board (A9)
and the main CPU A5 (cable X20-X20).
If the error is still present, check the cable of the RX button. It is
connected to X18 of the keyboard and it is transferred to the main CPU.
If all connections are OK and the fault is repetitive, replace the Generator
CPU board (A9).
|
Rate this Topic:
|
|||
|
