E362: X-ray button released during the examination procedure
Updated: 06/16/2017
Article #: 81
X-ray emission is commanded using the technique called "dead man's
switch", that means that it must be held pressed down until the end of
the emission, also during the interrupted emission phase of TMJ.
If this does not happen, the above error message is displayed; the
emission is stopped and all motors released in order to allow for the
patient’s exit.
Press the reset button and restart the operation as suggested by the
control system.
switch", that means that it must be held pressed down until the end of
the emission, also during the interrupted emission phase of TMJ.
If this does not happen, the above error message is displayed; the
emission is stopped and all motors released in order to allow for the
patient’s exit.
Press the reset button and restart the operation as suggested by the
control system.
|
Rate this Topic:
|
|||
|
