How to Set IP Address Rotograph Evo (Non-Touch)
Updated: 09/28/2018
Article #: 172
Setting IP Address
1) See manual at the link below
https://drive.google.com/open?
2) Pages 6-18, 6-19, 8-30, 8-32, 8-45 provide detail on LAN communication and instruct you how to access the setup mode to change and save Pano IP. The IP scheme should match that of your network.
3) IMPORTANT: After you save the new IP address, exit the menu by pressing 'T' button multiple times. Let the system go to "machine setting" mode on display, then reboot the Panoramic before attempting to ping new address from PC .
4) In the PCs you wish to enable image capture, make sure in the Villa software or twain configuration setup, that the IP matches that of the Panoramic
|
Rate this Topic:
|
|||
|
